基于静电自组装作用制备聚二烯丙基二甲基氯化铵巯基乙酸修饰金电极检测亚硝酸盐
NO2- Sensor Based on Poly (Diallyldimethylammonium Chloride) and Mercaptoaceti Acid Modified Gold Electrode Through Electrostatic Self-Assembly
投稿时间:2018-03-26  修订日期:2018-05-08
DOI:10.16495/j.1006-3757.2018.02.005
中文关键词:  聚二烯丙基二甲基氯化铵  巯基乙酸  亚硝酸钠  传感器
英文关键词:PDDA  MA  nitrite  sensor
基金项目:
作者单位
康世平 1. 陕西中烟工业有限责任公司 技术中心, 陕西 宝鸡 721000

2. 河南大学 化学化工学院 环境与分析科学研究所, 河南 开封 475004
 
屈建莹 1. 陕西中烟工业有限责任公司 技术中心, 陕西 宝鸡 721000

2. 河南大学 化学化工学院 环境与分析科学研究所, 河南 开封 475004
 
摘要点击次数: 685
全文下载次数: 4
中文摘要:
      利用常见易得的原材料聚二烯丙基二甲基氯化铵(PDDA)和巯基乙酸(MA),基于静电组装技术制备了PDDA-MA/Au传感器,用于亚硝酸盐的检测.试验表明,在0.2 mol/L磷酸缓冲盐溶液(PBS,pH 7.53,0.1 mol/L NaAc)中,NaNO2的氧化峰电流与其浓度在6.9×10-7~8.8×10-3 mol/L之间呈现良好的线性关系,试验测得检出限为6.9×10-7 mol/L,回收率在94.6%~101.8%之间.传感器制备简单、成本低,对NaNO2具有较高的灵敏度、较低的检测限、良好的稳定性及重现性.
英文摘要:
      A novel sensor was prepared using poly(diallyldimethylammonium chloride)(PDDA) and mercaptoaceti acid(MA) through the electrostatic self-assembly technique and was used for the detection of nitrite. Experimental conditions were optimized. PDDA-MA/Au responded to NaNO2 in the linear range from 6.9×10-7 to 8.8×10-3 mol/L (r=0.999 8) with a detection limit of 6.9×10-7 mol/L in 0.2 mol/L phosphate buffered saline(PBS,pH 7.53, 0.1 mol/L NaAc). The recovery ratio of the sensor was 94.6%~101.8%. Experiments showed that the sensor is of easy preparation, low cost and responses rapidly with high sensitivity and good reproducibility, stability. The sensor possesses a potential application value.
HTML  查看全文  查看/发表评论  下载PDF阅读器