改性活性碳自组装多孔层毛细管气相色谱柱的研制及其特性评价
Preparation of the Phosphate Modified Charcoal Self-assembled PLOT Capillary Column for Gas-Solid Chromatography
投稿时间:2002-03-07  修订日期:2002-04-09
DOI:
中文关键词:  活性碳  自组装膜  多孔层开管柱  吸附色谱  气相色谱
英文关键词:charcoal self assembled monolayers  PLOT column  adsorption chromatography  GC
基金项目:
作者单位
赵国宏 中国科学院兰州化学物理研究所 甘肃兰州730000 
雷晓强 中国科学院兰州化学物理研究所 甘肃兰州730000 
王仲来 中国科学院兰州化学物理研究所 甘肃兰州730000 
陈立仁 中国科学院兰州化学物理研究所 甘肃兰州730000 
摘要点击次数: 704
全文下载次数: 3
中文摘要:
      采用自组装膜制备技术和超细亚微米级吸附剂研制高效活性碳多孔层毛细管色谱柱(PLOT),选用K3PO4、K2HPO4和KH2PO4三种不同的磷酸盐对色谱柱进行改性脱活,考察了脱活盐浓度对色谱柱保留行为的影响程度,并采用研制的高效活性碳PLOT毛细管色谱柱对惰性气体和低碳烃(H2、Air、CO、CO2和C1~C4烃)进行了分离分析.结果表明:在高效活性碳PLOT毛细管色谱柱制备工艺中,活性碳吸附剂的最佳粒度为0.5~0.7μm之间;磷酸盐脱活剂的最佳浓度为1.5%,老化时间为250℃;所研制的高效活性碳PLOT毛细管色谱柱对惰性气体和低碳烃具有较好的分离度.
英文摘要:
      A simple method for the preparation of submicron charcoal PLOT columns using fused silica capillaries by means of self assembled monolayerstechnology was reported. These columns were deactivated with K3PO4, K2HPO4 and KH2PO4 respectively, the retention behavior of the columns were evaluated, and used to separate inert gases and light hydrocarbons. The optimal range of pore size of charcoal particles used to prepare PLOT column was considered as 0.5~0.7 μm, the fitter conditional temperature and the favourable concetration of phosphate used to deactivate charcoal was 250℃ and 1.5% respectively.
HTML  查看全文  查看/发表评论  下载PDF阅读器