氧化锰型固态pH电极的研制
Fabrication of MnO2-based Solid pH Electrode
投稿时间:1999-12-27  修订日期:2000-03-17
DOI:
中文关键词:  氧化锰  pH电极
英文关键词:MnO2  pH electrode
基金项目:
作者单位
舒友琴 郑州牧业工程高等专科学校, 河南郑州450008 
袁道强 郑州牧业工程高等专科学校, 河南郑州450008 
摘要点击次数: 640
全文下载次数: 1
中文摘要:
      以超细MnO2粉末为敏感材料制备了两种固体pH电极.涂层电极可以在水溶液中呈现出快速稳定的pH响应。响应的线性范围为pH2~12,响应灵敏度为-81.5mV/pH.印刷电极的线性响应范围要略窄于涂层电极,但响应灵敏度近似.
英文摘要:
      Ultrafine MnO2 powders were used to fabricate two kinds of solid pH electrodes. The electrode coated with a thin film of MnO2 could exhibit a fast,stable pH-response in aqueous solution. A linear pH-potential curve was observed over the range of pH 2~12 with a sensitivity of -81.5 mV/pH at room temperature. However,the electrode fabricated with screen-printed method had a little poor than the coated electrode.
HTML  查看全文  查看/发表评论  下载PDF阅读器